USB Blaster Programmatore Mini Altera FPGA CPLD Cavo

Product Description

USB Blaster programmer Mini Altera FPGA CPLD cable

First, the product USB-Blaster download cable basic characteristics :

1 . Steady support SignalTap II embedded logic analyzer function ;

2 . ALTERA company supports a full range of devices. Absolute whole series, do not worry about a device does not support !

  USB2.0 high speed 480bps

 CPLD: MAX3000, MAX7000, MAX9000 and MAXII etc.
 FPGA: Stratix, StratixII, StratxIII, Cyclone, CycloneII, CycloneIII, ACEX1K, APEX20K and FLEX10K etc.
 active serial configuration device : EPCS1, EPCS4, EPCS16, EPCS64 etc.
 enhanced configuration devices : EPC1, EPC4 so on.
3 . Supports three download mode : AS, PS and JTAG;
4 . Communication and debugging support and Nios II embedded soft-core processors in the system , Rev.C latest version of firmware ! ;
5. Speed: parallel port download cable than usual ByteBlasterII six times faster ;
6. Easy to use : MiniUSB interface easy connection, two status LEDs makes debugging much easier.
7 . Must: currently laptop has almost eliminated the parallel port, so common was ByteblasterMV and ByteblasterII download lines can not be used in a notebook , so for notebook users, choose USB download cable that is convenient , it is a must.
8. Fully compatible with ALTERA USB Blaster, use, functionality and performance are consistent and ALTERA original download cable .

9. Under Quartus II development software ! Quartus II versions Download:

    ftp://ftp.altera.com/outgoing/release

    Note: The above version 8.1 comes with no additional driver download ;

10, WIN7 customers download Quartus II10.1 above !

Abbiamo disponibili datasheet di tutti i componenti, qualora non fosse presente nella scheda download del prodotto inviaci un messaggio dal modulo contattaci e lo pubblicheremo il prima possibile nel nostro sito.