Conductive glass 10ohm 1310 50*50*1.1mm ITO

Product Description

Conductive glass 10ohm 1310 50*50*1.1mm ITO

1. Specifications: 50 * 50MM single.

2. Thickness: 1.1mm; (other thickness contact customer service to build)

3. Flatness:
Parameter description of glass flatness
Thickness / mm
Glass flatness (surface waviness)
STN (polished) glass
TN (ordinary) glass
1.10
Lt; / RTI & gt;
Lt; / RTI & gt;
0.70
Lt; / RTI & gt;
Lt; / RTI & gt;
0.55
Lt; / RTI & gt;
Lt; / RTI & gt;
0.40
Lt; / RTI & gt;
Lt; / RTI & gt;
Glass smoothness parameter explanation picture:

4. ITO conductive glass parameters of the table:

specification

Resistance (? / )

Transmittance(%)

Etching time / s

Film thickness

20?

15?-20?

>= 85.0

<=140

950Å ± 100Å

15?

10?-15?

>= 85.0

<= 180

1350Å ± 150Å

10?

7?-10?

>=  85.0

<= 240

1850Å ± 150Å

6?

5?-7?

>=  85.0

<=350

2200Å ± 200Å

Note:

Square resistance is the resistance of the box, that edge to edge “of the” resistance.

Square resistance with a dedicated four-probe probe to test the multimeter’s test leads can only point to point between the resistance, and this point to point between the resistance does not mean anything.

Multimeter measured the value of more than 1 times larger than the resistance.

5. Cleaning: ITO conductive glass cleaning agent; (Division I can provide ancillary products).

6. Wiring connection: conductive tape connection, dedicated pin connection, Yin Yin wiring (I can provide the Secretary for ancillary products).

7. Applications: solar cells, biological experiments, electrochemical experiments (electrodes), the major university laboratories and other new areas of science and technology.