2PCS 32×32 RGB P5 LED Matrix Panel

Product Description

2PCS 32×32 RGB P5 LED Matrix Panel

Description: Are you looking to add a lot of color to your project? These massive 32×32 RGB LED panels are an awesome place to start. You can create animations, games, or all sorts of other fun displays with them. Yes, you read that right: a 32×32 LED matrix, that’s 1024 LEDs on a 6.3″ x 6.3″ board. On top of all that, thanks to two IDC connectors, and a seamless frame, these panels can be daisy chained together to form even bigger LED displays.

These panels require a regulated 3.3-5V supply for power which needs to be able to source a good amount of current – up to 2A in the worst case. Included with each panel is a 0.15″ pitch 4-pin polarized connector power cable which is terminated with both a female polarized connector, and a pair of spade terminals. Needless to say, if you are looking for a large, cheap, and easy to use RGB LED matrix you’ve come to the right place.

Note: These displays were intended for use with FPGAs and high-speed processors. We’ve found that 16MHz is about the slowest processor that can drive these adequately. If you want to daisy-chain them together, you will need more speed and more RAM.

Features:

• 1024 RGB LEDs
• 1/16 Scan Rate
• Dual IDC Connectors for Daisy Chaining
• 3.3-5V Supply Voltage

Includes:

• 1x 32×32 RGB LED Panel
• 1x 0.15″ Pitch 4-pin Power Cable w/ Spade Connectors
• 2x 16-pin (2×8) Ribbon Cables